DEVELOPMENT
QUALITY WIRELESS INDOOR CONTROLLABLE LIGHTS
STUDENT
NAME: NOOR HAFIZA BINTI AHMAD
ID
NO.: 51210111011
INSTITUTION:
BRITISH MALAYSIAN INSTITUTE UNIKL
SECTION:
BACHELOR OF ELECTRICAL
SUPERVISOR:
MR. ABDUL RAZAK AHMAD
--------------------------------------------------------------------------------------------------------
The purpose of this project is to
improve the development of our home wireless. This progress report discusses the progress I have made from July
to November 2012.
ABSTRACT
Wireless
is one of the improvements in our life. So for my project, I have come out with
this title and this project because I know we have to improve our development
of our home wireless. Nowadays, all the things around us is controlled by the
wireless, even the lights along the highway also used the wireless
controllable. So, for the improvement I would like to make our life easier and
comfortable by construct this project. Besides, like we know in Malaysia we
always 1 step behind from the other countries in this world, so by this project
may be we can move 1 step forward to be together with other countries. The
application for this project can be applied in the house, office or shops around
us. It can be controlled by using the microphone wireless and will be detected
by voice decoder that programmed to follow our command in our home. By using
this application, the owner can bring the microphone all around the house and
can controlled the lights from other rooms and the led at the wall unit will be
blinking to tell us either the lights is turning on or off. This project also
can saving cost, energy & time.
PROBLEM
STATEMENT
This project is to develop in order to control
and command the light in our homes by using the wireless or microphone. This
project is very useful when the user is very lazy to switch off the lights or
any other AC devices in our home. This is happened because the user only has to
speak to the microphone & give the command also will make it easier while
increasing the efficiency & effectiveness of working with that device.
Besides, as we know this project will reduce the wiring in our house, so in the
same time it also will reduce the risk of house burning or electrical shock.
